Huawei FusionModule5000 Series Installation Manual page 144
Smart modular data center single-row aisle containment with 2000 mm high cabinets, ecc800
Hide thumbs
Also See for FusionModule5000 Series:
- Maintenance manual (198 pages) ,
- Commissioning manual (137 pages) ,
- Product description (123 pages)
Table of Contents
Advertisement
FusionModule5000 Smart Modular Data Center
Installation Guide (Single-Row Aisle Containment with
2000 mm High Cabinets, ECC800)
Figure 9-36 Installing the mounting plate of the magnetic lock cover
Step 6 Install the magnet.
1.
Take out the magnet from the magnetic lock fitting bag, insert the positioning pins of the
magnetic into the magnet using a rubber mallet, as shown in
Figure 9-37 Installing positioning pins of the magnetic
2.
Insert the assembled magnet into the magnetic lock base on the revolving door, and
secure the magnet to the door using the screws on the door and the white washer
delivered with the magnet lock, as shown in
When securing the magnetic to the door panel, do not over-tighten the screws so that the white rubber
washer is elastic. The washer will adjust the magnetic to a correct position because of its elasticity.
Issue 01 (2019-03-05)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Installing Monitoring Devices
Figure
9-37.
Figure
9-38.
135
Advertisement
Table of Contents
