Huawei FusionModule5000 Series Installation Manual page 117

FusionModule5000 Smart Modular Data Center
Installation Guide (Single-Row Aisle Containment with
2000 mm High Cabinets, ECC800)
Figure 8-6 Installing a supporting plate
Step 5 Install a partition plate. Press both sides of the V-shaped partition plate with hands to decrease
the angle to a proper degree, and clamp the clasps at the bottom into the nearby holes, as
shown in
conditions, you can select holes as required.)
Figure 8-7 Installing a partition plate
Step 6 Install adjacent cable troughs in the same way.
Step 7 Rotate the interconnecting wrench and clamp it into the clasps until the wrench is horizontal,
as shown in
Issue 01 (2019-03-05)
Figure 8-7. (By default, clamp the clasps into the two holes in the middle. In actual
Figure 8-8. This operation interconnects the cable troughs.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 (Optional) Installing Cable Troughs
108