Tools And Instruments - Huawei FusionModule5000 Series Installation Manual

FusionModule5000 Smart Modular Data Center
Installation Guide (Single-Row Aisle Containment with
2000 mm High Cabinets, ECC800)
Documentation
(1100 mm Deep)
NetCol5000-C 30 kW
Chilled Water In-Row
Precision Air Conditioner
Quick Guide (Simplified
Edition)
New Main Way Quick
Guide
Indoor Cable Tray
Installation Guide
Smart Module Battery
Wiring Diagram
iBAT 2.0-CIM01C2 User
Manual
ECC800 Data Center
Controller (ECC Version)
User Manual
iManager NetEco Device
Commissioning Guide-
(NetEco Version)
iManager NetEco Product
Document - (NetEco
Version)

1.7 Tools and Instruments

This section lists the tools and instruments required for installation.
Issue 01 (2019-03-05)
Purpose
power-on operations for the
PDU8000 Precision PDC.
Describes the installation
and cable connection for
the NetCol5000-C 30 kW
air conditioners.
Describes how to install the
new main ways.
Describes how to install the
in-room cable trays.
Provides guidance about
battery arrangement and
cable connections.
Describes the installation,
cable connection, and
power-on operations for the
CIM and BIM.
Describes the overview of
the ECC800 and its ports,
installation, commissioning,
user interfaces,
maintenance, and
troubleshooting.
Describes how to connect
monitoring hardware to the
NetEco.
Describes how to install
monitoring hardware and
configure monitoring
software.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Installation Preparations
Obtaining Method
(Remarks)
click Download.
The document is delivered
with the device, or you can
click Download.
Delivered with new main
way.
Click Download.
Delivered with battery
cables.
Click Download.
The ECC version depends on
the version in use. Click
on the ECC800 WebUI to
obtain the ECC version in
use. Click Download.
The NetEco version depends
on the version in use. Click
on the NetEco WebUI to
obtain the NetEco version in
use. Click Download.
The NetEco version depends
on the version in use. Click
on the NetEco WebUI to
obtain the NetEco version in
use. Click Download.
9