Removing The Air Conditioner Pallet - Huawei FusionModule5000 Series Installation Manual

FusionModule5000 Smart Modular Data Center
Installation Guide (Single-Row Aisle Containment with
2000 mm High Cabinets, ECC800)

4.3.3 Removing the Air Conditioner Pallet

Procedure
Step 1 Open the rear door and remove the kit connecting the pallet to the cabinet at the rear door, as
shown in
Figure 4-35 Removing the connecting kit at the rear door of the cabinet
1.
2.
3.
Step 2 Open the front door. Use the method described in
plate to the cabinet at the front door, as shown in
Properly store the bolts. If a support is required, use the screws to secure the support.
Step 3 Move the cabinet to the specified position. A manual pallet truck is usually used to transport
the equipment. If a pallet truck is unavailable or not allowed, transport the equipment by
manpower. Six persons are required to complete the handling. Remove the side panel. Four
Issue 01 (2019-03-05)
Figure 4-35.
Remove the two M10 bolts securing the connecting kit at the rear door of the cabinet to
the pallet.
Remove the two M12 bolts securing the connecting kit at the rear door of the cabinet to
the cabinet.
Pull out the connecting kit.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation Preparations
Step 1 to remove the kit connecting the
Figure 4-35.
52