Huawei FusionModule5000 Series Installation Manual page 21

FusionModule5000 Smart Modular Data Center
Installation Guide (Single-Row Aisle Containment with
2000 mm High Cabinets, ECC800)
Name, Specifications, and Appearance
NOTE
This table may not list some tools required at specific sites. Onsite installation personnel and technical
support personnel should prepare tools based on site requirements.
Table 1-5 Transportation and unpacking tools
Tool Appearance, Specifications, and Name
Pallet truck
Table 1-6 Air conditioner tools
Tool Appearance, Specifications, and Name
36 mm adjustable
wrench (2 PCS)
Steel brush
Issue 01 (2019-03-05)
Diesel forklift
Socket wrench
M10/M12
Hot melt device
(used when the
water pipes are
made of PPR or
aluminum-plastic
material)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Installation Preparations
Lifting rope (bearing
capacity ≥ 400 kg)
5 mm hex key
Nitrogen cylinder
Lever (bearing
capacity ≥ 400 kg)
Open end torque
wrench
Pressure gauge
12