Table of Contents
Advertisement
FusionServer Pro 2288X V5 Server
User Guide
Procedure (on the BIOS)
Step 1 Restart the server, and enter the BIOS.
For details, see
Step 2 Choose Advanced > IPMI iBMC Configuration and press Enter.
The IPMI iBMC Configuration screen is displayed.
Step 3 Select iBMC Configuration and press Enter.
The iBMC Configuration screen is displayed, showing the iBMC IP address.
Step 4 Select IPv4 IP Address and press Enter.
The IPv4 IP Address dialog box is displayed.
Step 5 Change the IPv4 address of the iBMC management network port.
Step 6 Press F10.
Save the settings and exit.
----End
7.4.6 Configuring RAID
The 2288X V5 supports multiple types of RAID controller cards.
●
●
7.4.7 Configuring the BIOS
Scenarios
This section describes how to configure the BIOS of the server.
To configure the BIOS, perform the following operations:
●
●
●
●
For details about other configurations, see
Parameter
Issue 04 (2020-06-05)
9.6 Accessing the
Use
Intelligent Computing Compatibility Checker
about the compatible RAID controller cards.
The configuration method varies depending on the RAID controller card
model. For details, see
Set the system boot sequence
Set PXE for a NIC
Set the BIOS password
Select a language
Reference.
Copyright © Huawei Technologies Co., Ltd.
BIOS.
Huawei V5 Server RAID Controller Card User
Huawei Server Purley Platform BIOS
7 Installation and Configuration
to obtain information
Guide.
105
Advertisement
Table of Contents
