Phase 2 Hardware Addition/Replacement
Save Translations Removable-Media
(post-upgrade)
1. Type save translations removable-media and press
upgraded translations from the disk drive to the removable media, which
takes about 2 minutes.
Save Announcements Removable-Media
(if necessary—post-upgrade)
1. If using a TN750/B Announcement circuit pack, type save
announcements removable-media and press
announcements from the disk drive to the removable media.
Restore Disk
NOTE:
Until this command finishes, the system provides no user feedback on the
management terminal screen. Do not press
executes. Doing so causes the terminal screen to clear as the command
finishes; erasing any success or failure messages the system may provide.
If standard reliability:
1. Type restore disk full and press
removable media to the disk drive, which takes about 10 minutes.
2. Type list configuration software-version and press
copies are good.
3. Verify that
If high or critical reliability:
1. Type restore disk full both and press
removable media to the disk drive, which takes about 20 minutes.
2. Type list configuration software-version long and press
that all copies are good.
3. Verify that
555-233-115
All copies are good
On the System Configuration screen, page 2, 4-mem is displayed in
the Memory, R-Media, and Disk fields.
All copies are good
On the System Configuration screen, page 2, 4-mem is displayed in
the Memory, R-Media, and Disk fields.
Enter
to copy
Enter
while the command
Enter
to copy the information on the
Enter
Enter
to copy the information on the
Enter
Issue 7 November 2003
to copy
to verify that all
to verify
Enter
2-45
Need help?
Do you have a question about the DEFINITY Server R and is the answer not in the manual?