Avaya DEFINITY Server R Manual page 322

Adding New Carriers and EPN Cabinets
Power Up MCC Port Network
1. At the MCC port network, set the main circuit breaker to ON.
2. The system performs a level 4 rebooting process, loading the system
program and default translations from the disk. Rebooting takes 5 to 11
minutes.
3. Refer to "Initialization and Recovery" and "LED Interpretation" chapters in
Maintenance for Avaya DEFINITY Server R for circuit pack LED indications
and management terminal displays that occur during system reboot.
4. After the system reboot is finished and all trouble cleared, verify that the
EMERGENCY TRANSFER CONTROL switch is set to AUTO. This
restores the system to the normal operating mode.
Restart DEFINITY LAN Gateway System
1. Log onto the DEFINITY LAN Gateway.
2. When the main menu appears, select Maintenance.
3. Select Reset System from the Maintenance menu.
4. Select Restart System from the Reset System menu.
Enter Added Translations
1. Enter added translation data as applicable using Administrator's Guide for
Avaya Communication Manager.
Resolve Alarms and Enable Alarm Origination
1. Examine the alarm log. Resolve any alarms.
2. If the Alarm Origination Activated field administration is already
set to y, be sure to enable Alarm Origination. Otherwise you do not need to
enable Alarm Origination (proceed to the next section).
3. Type change system-parameters maintenance and press
The Alarm Origination Activated field was changed to Alarm
Origination to OSS Numbers to support more than 1 OSS.
6-6
Issue 7 November 2003
.
Enter
555-233-115