Avaya DEFINITY Server R Manual page 526

Fiber Link Administration
DS1 Converter Complex Administration for T1 TN1654 Circuit Packs.
add fiber-link next
A-PNC DS1 CONVERTER (DS1CONV) ATTRIBUTES
DS1CONV Board Location: 01B01
DS1CONV Board Type: TN1654
Facility Installed?
Bit Rate:
Facility Startup Idle Code:
Line Coding:
Framing Mode:
DS1CONV-1 Line Compensation:
DS1CONV-2 Line Compensation:
Facility A Circuit ID: 09876543
Facility B Circuit ID: 234567889
Screen A-5. Fiber Link Administration form for T1 TN1654 Circuit Pack (DS1 Converter
Complex Administration) (page 2 of 3)
The following unique fields display when administering a T1 TN1654 DS1
Converter.
Bit Rate
Enter either 1.544 for domestic (USA) T1 operation or 2.048 for
international E1 operation.
NOTE:
Since one bit rate applies for all facilities within the same DS1
Converter complex, the Bit Rate field displays only under
Facility A.
Facility Startup Idle Code
pack is TN1654. Enter 8 digits, each digit must be 0 or 1. The second digit
must be 1. Default is 11101000. You can administer this field on a per
circuit pack basis. This is the idle code used when a TN1654 first
establishes a link on a T1/E1 facility. The initial idle code used by the
TN1654 is overwritten by the center stage switch to an "all ones" pattern
once framing is established on that T1/E1 facility.
Framing Mode
display-only field.
A-16
Issue 7 November 2003
FIBER LINK ADMINISTRATION
DS1CONV Board Location: 02B01
DS1CONV Board Type: TN1654
DS1 CONVERTER FACILITIES
A B
yes yes
1.544
11101000
ami-zcs ami-zcs
1 1
1 1
—
Displays when the DS1 Converter circuit pack is TN1654.
—
Displays when the DS1 Converter circuit
—
For TN1654 with 1.544 Mbps Bit Rate, this is a
Page 2 of 3
C D
no no
ami-zcs ami-zcs
1 1
1 1
555-233-115