Task Table
3. In the Emergency Number - External field (required) type a 21-digit,
dialpad-valid character string that can include trunk access codes. The
default for this field is 911.
4. In the No-License Incoming Call Number field (optional) type a valid
extension.
NOTE:
This number cannot be a hunt group or ACD number.
5. Press
Set Daylight Savings Rules
You can set up to 15 customized daylight savings time rules. If you have cabinets
in several different time zones, you can set up rules for each on a location basis. A
daylight savings time rule specifies the exact time when you want to transition to
and from daylight savings time. It also specifies the increment at which to
transition.
NOTE:
The default daylight savings rule is 0, meaning no daylight savings
transition.
1. Type change daylight-savings-rules and press
Rule
0: No Daylight Savings
1: Start: first Sunday___ on or after April
Stop: first Sunday___ on or after October
2: Start: first _________ on or after ________ __ at __:__
Stop: first _________ on or after ________ __ at __:__
3: Start: first _________ on or after ________ __ at __:__
Stop: first _________ on or after ________ __ at __:__
4: Start: first _________ on or after ________ __ at __:__
Stop: first _________ on or after ________ __ at __:__
5: Start: first _________ on or after ________ __ at __:__
Stop: first _________ on or after ________ __ at __:__
2. Type the appropriate Start and Stop information in the Change Day,
Month, Date, Time, and Increment fields for each rule. For example,
1:00 in the Increment field means to move the clock forward or back by
one hour at the transition point.
NOTE:
You can change any rule except rule 0 (zero). You cannot delete a
daylight savings rule if it is in use on either the Locations or Date and
Time screens.
3. When done, press
555-233-115
to save the changes.
ENTER
DAYLIGHT SAVINGS RULES
Change Day
.
ENTER
.
RETURN
Month
Date
Time
Increment
1
at _2:00
25 at _2:00
Issue 7 November 2003
01:00
1-23
Need help?
Do you have a question about the DEFINITY Server R and is the answer not in the manual?