Disable Maintenance; Check Link Status; Save Translations - Avaya DEFINITY Server R Manual

Remove the Present System

Disable Maintenance

1. To prevent scheduled daily maintenance from interfering with the update or
upgrade, type change system-parameters maintenance and press
2. If scheduled maintenance has begun, set the Stop Time field to 1 minute
after the current time.
or
If scheduled maintenance has not begun, set the Start Time field to a
time after the upgrade is completed. For example, if you start the upgrade
at 8:00 p.m. and the upgrade takes 90 minutes, set the Start Time field
to 21:30.
!
CAUTION:
If you do not disable Alarm Origination, the system may generate
alarms, resulting in unnecessary trouble tickets.
3. Type neither in the Alarm Origination to OSS Numbers field and
press
NOTE:
For some software loads, set the Alarm Origination
Activated field to n and set the Cleared Alarm Notification
and Restart Notification fields to disable or n before pressing
Enter

Check Link Status

1. Type display communication-interface links and press
all enabled links.
2. Type status link number and press
3. Write down which links are in service.

Save Translations

1. Type save translation and press
from memory to the translation card.
2. Check for translation errors before proceeding with the upgrade. If errors
are detected, refer to
''Troubleshooting an Upgrade''
the upgrade until the errors are corrected.
555-233-115
Enter.
.
''No Translations after upgrade''
. Repeat this step for all links.
Enter
to write all translation information
Enter
in
to correct the problem. Do not continue with
Issue 7 November 2003
.
Enter
. Write down
Enter
Appendix B,
3-11