Interconnect Port Networks With Fiber Optic Cabling - Avaya DEFINITY Server R Manual

Upgrading a Multicarrier G2 Universal Module to Avaya
DEFINITY Server R EPN running Avaya Communication
Manager
Check Customer Options
1. Type display system-parameters customer-options and press
set the customer options that were purchased.
Ensure that the G3 version: field is V11.
2. If the customer was using Supplementary Services Protocol b or d on an
ISDN-PRI trunk group before the upgrade, go to screen 7, QSIG Optional
Features, and ensure that the Basic Call Setup field is y.
Save Translations
1. Type save translation and press
disk. If the translations were corrupted during the upgrade, the following
error message displays when logging in:
!
WARNING:
Translation corruption detected; call Avaya distributor immediately.
NOTE:
The save translation command cannot function if the translation
corruption message appears. See
page
Back Up Disk
1. Type backup disk and press
2. Type test stored-data long and press
verify the consistency of the MSS files (on the disk and removable media).
Return Replaced Equipment
Return replaced equipment to Avaya.
Interconnect Port Networks with Fiber
Optic Cabling
Three reliabilities:
''Standard Reliability'' on page 5-93
''High Reliability'' on page 5-101
''Critical Reliability'' on page 5-112
5-92
Issue 7 November 2003
Enter
B-1.
to backup all changed files.
Enter
to get upgraded translations onto
''Troubleshooting an Upgrade'' on
. This instructs the system to
Enter
555-233-115
to
Enter