Avaya DEFINITY Server R Manual page 430

Adding or Removing Cabinet Hardware
Troubleshooting firmware downloads
This section contains these troubleshooting subsections:
''Aborting a firmware download'' on page 7-20
''Testing firmware download'' on page 7-20
''Backing out of a firmware download'' on page 7-21
Aborting a firmware download
You can only abort (disable/cancel) a scheduled download that has not yet
started. Any download currently in progress to a circuit pack finishes. For
example, if you had scheduled a C-LAN distributed download to multiple targets
and the download was in progress to the first circuit pack when you disabled the
download, then the download would stop after the completion of the first circuit
pack's download and the remainder of the circuit packs would not receive the
download.
To abort a self or C-LAN-distributed firmware download, enter the SAT command
disable firmware download.
Testing firmware download
You can test a self- or C-LAN-distributed firmware download either before a
scheduled download has begun or after an attempted download has reported
errors.
1. Type test firmware download and press
screen.
If the download has already begun, the test is denied.
test firmware download
Port Maintenance Name
FW-DWNLD
2. Look in the Result field for FAIL/PASS conditions.
The Result field in the screen shows PASS, indicating a successful test of
the firmware download circuitry.
7-20
Issue 7 November 2003
TEST RESULTS
Alt. Name Test No. Result
1413 PASS
to display the Test Results
Enter
SPE A
Error Code
555-233-115