Avaya DEFINITY Server R Manual page 423

Upgrade Firmware on Programmable Circuit Packs
d. Type binary and press
e. If you are self downloading to a TN2501AP (VAL) circuit pack, type
f. Type put filename.ext and press
g. Type ls and press
h. Type bye and press
Schedule a download to target(s)
You can schedule the download to occur immediately or at a later date and time.
The procedures for self- and C-LAN-distributed download methods differ at this
step.
1. Type change firmware download and press
2. Fill in the fields as described in
descriptions'' on page
Table 7-5. Firmware Download fields and descriptions
Field Description
Source Board's Type the UUCSS address of
Location the source circuit pack.
555-233-115
Enter
in binary format.
!
CAUTION:
Files are corrupted during transfer if you do not specify binary.
cd /
This command moves you from the announcement directory (default
for an FTP session on the VAL board) to the root directory ("/"),
where firmware and other files reside. This keeps the firmware
image file separate from the announcement files.
image file to the source directory in RAM.
to verify that the new firmware image file is
Enter
on the circuit pack.
Enter
7-13.
. This requests that files be transferred
to copy the new firmware
Enter
to end the FTP session.
.
Enter
''Firmware Download fields and
Notes
For a self download, the same board
is the source board and target
board.
For a C-LAN-distributed download,
this is the source C-LAN location.
Continued on next page
Issue 7 November 2003
7-13