Avaya DEFINITY Server R Manual page 441

Add Multiple Integrated Announcement Circuit Packs
10/100 Mb ethernet interface, allowing announcement and firmware file
portability over your LAN (FTP server functions).
supports .wav announcement files (see
Important File Specifications
Voice Announcement over LAN (VAL) requires that announcement files are in the
following .wav formats:
CCITT A-Law or CCITT µ-Law companding format (do not use PCM)
8KHz sample rate
8-bit resolution (bits per sample)
Mono (channels = 1)
You must convert other wave ( .wav) file formats to those listed above. Telephone
access creates the correct file formats.
Caveats
Remember the following points when using the TN2501AP integrated
announcement circuit pack for the first time or when replacing the TN750C circuit
pack:
Despite the feature name, announcements are not played over the LAN but
can be transferred to and from the TN2501AP circuit pack over the LAN.
You cannot save or restore announcements to a TN2501AP circuit pack
to/from
— a TN750C circuit pack.
— flash cards.
— tape.
— magneto optical disks.
See ''Important File Specifications'' on page 7-31
converting a professionally-recorded announcement to a VAL-compatible
file format.
Number of announcement circuit packs
The following table shows the capacities of the TN2501AP integrated
announcement circuit pack. Release 9.5 and higher software provides Voice
Announcements Measurements that generate detailed reports about the
announcement usage for all integrated and non-integrated announcements.
555-233-115
Important File Specifications).
for information about
Issue 7 November 2003
7-31