Set Locations (If Necessary); Set Core Dump Vector (H/C Only); Release Mmi (High/Critical Reliability Only) - Avaya DEFINITY Server R Manual

Upgrading Release 9/10r to Avaya DEFINITY Server R
Running Avaya Communication Manager

Set Locations (if necessary)

After you set the daylight savings rules, you must set the locations for all switches.
It is possible to have switches in different time zones.
1. Type change locations and press
LOCATIONS
ARS Prefix 1 Required for 10-Digit NANP Calls? _
Number Name
1 Main________________
2 ____________________
3 ____________________
4 ____________________
5 ____________________
6 ____________________
7 ____________________
8 ____________________
9 ____________________
10 ____________________
11 ____________________
12 ____________________
2. Type y in the ARS Prefix 1 Required for 10-Digit NANP
Calls? field.
3. Type the information in the various fields for each switch.
NOTE:
Use the name of the switch or "Local Switch" in the Name field for the
first location.
4. Press

Set core dump vector (H/C only)

1. Type set vector f spe-maint and press
This command enables the system to perform a core dump in the event of
any system restart. The core dump can be used as a diagnostic tool to help
determine the cause of the restart.

Release MMI (High/Critical reliability only)

1. Type release board UUCSS and press
that you busied-out in the
1-24
Issue 7 November 2003
Timezone
Offset
+ 00:00
_ __:__
_ __:__
_ __:__
_ __:__
_ __:__
_ __:__
_ __:__
_ __:__
_ __:__
_ __:__
_ __:__
to save the changes.
ENTER
Busyout MMI Circuit Packs
.
RETURN
Page 1 of 3
Daylight-Savings
Rule
_1
__
__
__
__
__
__
__
__
__
__
__
.
Enter
to release the circuit packs
RETURN
section.
Number Plan
Area Code
303
___
___
___
___
___
___
___
___
___
___
___
555-233-115