Avaya DEFINITY Server R Manual page 425

Upgrade Firmware on Programmable Circuit Packs
Table 7-5. Firmware Download fields and descriptions (Continued)
Field Description
Type y if you want the
Remove Image
procedure to automatically
File After
remove the new firmware
Successful
image file [default].
Download
Type n if you do not want the
new firmware image file
removed.
Type the date and time that
Start Date/T
you want the firmware
ime
download to begin.
Type the date and time that
Stop
you want the firmware
Date/Time
download to end.
Type the UUCSS address of
Target
the circuit pack that you are
Location
updating.
555-233-115
Notes
At the completion of a successful
download, the procedure
automatically removes the new
firmware image file from the source
file system, freeing up the memory
on the source circuit pack. We
recommend using the default
setting.
If field is set to n, you must manually
remove the new firmware image file
from the source file system after the
download has completed. (See
''Disable file system'' on page 7-19
for instructions.)
If the scheduled stop time is
reached before the new firmware
image file has been downloaded to
every circuit pack, the system
finishes downloading to the circuit
pack in progress before aborting the
remainder of the download
schedule.
For a self download, this circuit pack
must reside in the same location as
the source pack.
For a C-LAN-distributed download,
enter up to 50 locations — these
must all be the same type of circuit
pack.
Continued on next page
Issue 7 November 2003
7-15