Avaya DEFINITY Server R Manual page 539

Troubleshooting License File problems
Table B-1. Error messages and repair procedures (Continued)
License Mode
No-License
Initialization and periodic checking
When the switch initializes and hourly after that, the system checks all License
File parameters.
a result of these periodic checks and the associated License-Error and
No-License modes.
555-233-115
Description Explanation and repair procedure
Outgoing and If you initially login to the SAT if you get a
incoming calls only message that says: No-License:
to administered
xxxxx; Call Processing Blocked,
emergency the 'xxxx' tells you why you are in
numbers. No-License mode, and no call processing
is allowed. Calls in progress continue but
all new originations are denied.
One of the following conditions is present:
Clear No-License mode by:
Table B-2 shows the error messages that you can encounter as
No License File is installed in the
system.
The License-Error timer expired.
A Survivable Remote Processor
detects a port circuit pack in its port
network other than an Expansion
Interface pack.
A reset system 3 preserve-license
command has executed and the Offer
Category in translations does not
match the License File.
correcting the error or mismatch that
caused going into this mode.
installing a valid License File that is
consistent with the switch.
Continued on next page
Issue 7 November 2003
B-11