Set Daylight Savings Rules - Avaya DEFINITY Server R Manual

Install the MCC1 Cabinets

Set Daylight Savings Rules

You can set up to 15 customized daylight savings time rules. If you have switches
in several different time zones, you can set up rules for each. A daylight savings
time rule specifies the exact time when you want to transition to and from daylight
savings time. It also specifies the increment at which to transition.
NOTE:
The default daylight savings rule is 0, no daylight savings.
1. Type change daylight-savings-rules and press
Rule
0: No Daylight Savings
1: Start: first Sunday___ on or after April___ 1
Stop:
2: Start: first _________ on or after ____ __ at __:__
Stop:
3: Start: first _________ on or after ____ __ at __:__
Stop:
4: Start: first _________ on or after ____ __ at __:__
Stop:
5: Start: first _________ on or after ____ __ at __:__
Stop:
6: Start: first _________ on or after ____ __ at __:__
Stop:
7: Start: first _________ on or after ____ __ at __:__
Stop:
2. Type the appropriate start and stop information in the Change Day,
Month, Date, Time, and Increment (for example, 1:00 equals one hour)
fields for each rule.
NOTE:
You can change any rule except rule 0 (zero). You cannot delete a
daylight savings rule if it is in use on either the Locations or Date and
Time screens.
3. Press
555-233-115
DAYLIGHT SAVINGS RULES
Change Day
first Sunday___ on or after October_ 25 at _2:00
first _________ on or after ____ __ at __:__
first _________ on or after ____ __ at __:__
first _________ on or after ____ __ at __:__
first _________ on or after ____ __ at __:__
first _________ on or after ____ __ at __:__
first _________ on or after ____ __ at __:__
.
Enter
.
Enter
Month___Date Time____Increment
at _2:00
Issue 7 November 2003
01:00
3-17