Avaya DEFINITY Server R Manual page 323

Add MCC Port Carriers
4. Type first-only in this field to enable Alarm Origination (to the first OSS,
which should be INADS).
Be sure to type y in both Cleared Alarm Notification and Restart
Notification fields. Press
NOTE:
The INADS Database Administrator enables Alarm Origination as
part of the registration process.
!
CAUTION:
If you do not enable Alarm Origination when the customer has
purchased a services contract, the switch will not report any alarm to
the TSC automatically, causing the TSC to be unable to fulfill the
services contract.
Save Translations
1. If the system is high- or critical-reliability, type status spe and press
verify that the standby SPE is refreshed and that the standby disk is in
service.
2. Type save translation [spe-a or both] disk and press
command instructs the system to take all translation information in memory
and write it to the disk(s).
3. If the MCC port network contains a TN750 Announcement circuit pack,
type list configuration software-version and press
If screen 2 shows that recorded announcements were saved, these
announcements can be restored using the restore announcements
command. Type restore announcements and press
4. Type backup disk [spe-a or both] and press
the system to backup the current information on disk to the removable
media.
555-233-115
.
Enter
Enter
. This command instructs
Enter
Issue 7 November 2003
to
Enter
. This
Enter
.
.
Enter
6-7