Set Locations (If Necessary); Release Mmi (High/Critical Reliability Only) - Avaya DEFINITY Server R Manual

Upgrades and additions

Hide thumbs Also See for DEFINITY Server R:

Table of Contents

Phase 2 Hardware Addition/Replacement

Set Locations (if necessary)

After you set the daylight savings rules, you must set the locations for all cabinets.

It is possible to have cabinets in different time zones.

1. Type change locations and press

ARS Prefix 1 Required for 10-Digit NANP Calls? _

Main________________

____________________

2. Type y in the ARS Prefix 1 Required for 10-Digit NANP

Calls? field.

3. Type the information in the various fields for each switch.

Use the name of the switch or "Local Switch" in the Name field for the

first location.

1. Type release board cabinet carrier slot and press

circuit packs, which were busied out earlier.

to effect the changes.

Daylight-Savings

Issue 7 November 2003

to release the

Table of Contents

Do you have a question about the DEFINITY Server R and is the answer not in the manual?