Avaya DEFINITY Server R Manual page 479

Upgrades and additions

Hide thumbs Also See for DEFINITY Server R:

Table of Contents

Add IP Solutions

Figure Notes

1. LCD display

2. Reset button (recessed)

3. Red board status LED

Figure 7-11. TN802B IP Interface faceplate

If replacing the existing TN799 circuit pack, remove it first and replace it with

the new one.

1. Insert the TN799B circuit pack into the port slot identified earlier.

To properly seat the circuit pack, push firmly on the front of the

faceplate until the latch reaches the bottom rail of the carrier. Then

close the latch until it is fully engaged.

fpdfmapd KLC 030899

4. PCMCIA card slot

5. Yellow PCMCIA disk-in-use LED

Issue 7 November 2003

Chapters

Table of Contents

Do you have a question about the DEFINITY Server R and is the answer not in the manual?