Avaya DEFINITY Server R Manual page 419

Upgrade Firmware on Programmable Circuit Packs
Verify hardware/software requirements
Make sure you know which download procedure to use and that you have all the
hardware and software that is necessary to proceed.
Given the type of target circuit pack to be upgraded, choose an appropriate
source circuit pack from the following table
Pack''). The last column indicates which download method must be used
with the target and chosen source.
Table 7-4. Download Method by Circuit Pack
Target Circuit Pack(s)
TN464GP, TN2464BP, and
TN2313AP (UDS1)
TN2214CP or TN2224CP
(DIG-LINE)
TN771DP (Maintenance/Test)
TN2302AP (IP Media Processor)
TN799DP (C-LAN)
TN2501AP (VAL)
1. For TN2302AP circuit packs with a vintage less than 22, a different download procedure is
required that is not described here. Go to the Avaya Support Web site under Software &
Firmware Downloads, DEFINITY ECS, TN2302AP firmware downloads. On the page titled
"Retired - (OLD Do Not Use) DEFINITY Firmware Downloads", scroll down to the TN2302AP
section and click on TFTP_Firmware_download_procedure.pdf.
Make sure you have the following:
NOTE:
Some GUI-based FTP applications are incompatible with Avaya
Communication Manager. Command-line FTP applications launched from a
DOS prompt or UNIX shell work best.
555-233-115
Source Circuit Pack
TN799C or TN799DP
TN799C or TN799DP
TN799C or TN799DP
1
TN799C or TN799DP
TN799DP
TN2501AP
Superuser or services login and password to the Avaya
Communication Manager
PC or other server with the following:
— IP connectivity to the source board
— Web browser (Internet Explorer 5.0 or higher or Netscape
4.x)
— IP connectivity to the World Wide Web
— File transfer protocol (FTP) software program
(''Download Method by Circuit
Download Method
C-LAN-distributed
C-LAN-distributed
C-LAN-distributed
C-LAN-distributed
Self
Self
Issue 7 November 2003
7-9