Avaya DEFINITY Server R Manual page 446

Adding or Removing Cabinet Hardware
Other hardware
To establish LAN connections the TN2501AP circuit pack requires a
Backplane Adapter that attaches to the Amphenol connector on the back of
the cabinet, corresponding to the TN2501AP integrated announcement
circuit pack slot.
LAN cable
Backplane Adapter
Figure 7-4 shows the Backplane Adapter (label reads IP Media Processor).
Figure Notes
1. Amphenol connector
attaches to the back of the
switch cabinet,
corresponding to the
TN2501AP circuit pack slot.
Figure 7-4. Backplane Adapter (Comcode 848525887)
7-36
Issue 7 November 2003
that attaches to the Backplane Adapter.
3
1
addfipm2 KLC 083000
2. RJ-45 LAN cable connection
3. This connector is not used for VAL.
2
10 Mbps uses Category 3 cable.
100 Mbps uses Category 5 cable.
555-233-115