Avaya DEFINITY Server R Manual page 468

Adding or Removing Cabinet Hardware
Refer to the Administration for Network Connectivity for Avaya Communication
Manager for more information on these administration steps and for the steps to
administer IP Softphones and H.323 trunks.
NOTE:
The administration of the TN2302AP is the same as that for the TN802B.
Test the External Connection to the LAN
To test the external IP connections, ping the C-LAN or IP Media Processor server
and ping a known computer connected to your network. If everything is configured
correctly, the Result column on the Ping Results screen reads pass. If it reads
abort, verify the IP-address information and check the connectivity, including the
cabling.
1. Type ping ip-address nnn.nnn.nnn.nnn board UUCSS and press
The variable nnn.nnn.nnn.nnn is the IP address of the TN2302AP IP
Media Processor and UUCSS is the cabinet, carrier, and slot of the
TN2302AP IP Media Processor.
ping ip-address 192.168.10.21
End-pt IP
192.168.10.21
2. Type ping ip-address nnn.nnn.nnn.nnn board UUCSS and press
The variable nnn.nnn.nnn.nnn is the IP address of the customer's
gateway and UUCSS is the cabinet, carrier, and slot of the TN2302AP IP
Media Processor.
3. Type ping ip-address nnn.nnn.nnn.nnn board UUCSS and press
The variable nnn.nnn.nnn.nnn is the IP address of another computer
beyond the gateway and UUCSS is the cabinet, carrier, and slot of the
TN2302AP IP Media Processor.
The TN2302AP IP Media Processor is now installed in the carrier and connected
to the IP network.
7-58
Issue 7 November 2003
PING RESULTS
Port Port Type Result
01A13 MEDPRO PASS
Enter.
Time(ms) Error Code
10 1124
Enter.
Enter.
555-233-115