Avaya DEFINITY Server R Manual page 500

Adding or Removing Cabinet Hardware
Connect the Monitor, Keyboard, and Mouse
1. Attach a VGA monitor to the VGA connector of the TN802 IP Interface
external cable assembly.
2. Attach the keyboard to the KEYBOARD connector of the external cable
assembly.
3. Attach the mouse to the MOUSE connector of the external cable assembly.
4. Plug the monitor into an AC power receptacle and turn it on.
5. If upgrading locally, reboot Windows NT by pressing the recessed reset
button on the faceplate (see
the LCD shows a flashing MSHUT *. When the flashing stops and the
asterisk disappears (about 2 min), it is safe to remove the circuit pack.
6. After the TN802B is shut down, reseat the circuit pack to restart the
system.
7. Log in using ctrl alt del
Upgrading IP trunks to H.323 trunks
If there are existing IP trunk connections that you want to upgrade to H.323 trunk
connections, do the following steps. Otherwise, go to
page 7-91
To upgrade an existing IP trunk (R7) to an H.323 trunk (R8) requires first getting
IP information from the existing TN802 before upgrading the TN802 to TN802B.
1. Click on My Computer > Control Panel > Network.
2. Click the Protocols tab.
3. Select TCP/IP Protocol from the list.
7-90
Issue 7 November 2003
Figure 7-15) of the TN802B IP Interface until
''Upgrade to TN802B'' on
555-233-115