53 19 Removing And Installing Fan For Condenser; Removing Fan For Condenser; Installing Fan For Condenser - Porsche 996 TT Repair Manual

87 53 19 Removing and installing fan for condenser

Removing fan for condenser

Installing fan for condenser

top of page
Removing fan for condenser
1. Remove front wheel, front wheel housing liner and front spoiler.
2. Detach cooler bracket from the body −(1 nut, 2 M8 screws and 1 sheetmetal screw)− .
3. Undo −retaining clips− from the radiator and pull off the radiator bracket downwards.
4. Disconnect the electrical plug connection and undo 2 sheetmetal screws from the fan housing.
5. Pull the fan housing with fan motor out of the
holder.
6. Detach −fan motor and ballast resistor− from the fan housing and remove.
top of page
Installing fan for condenser
1. After installation, check whether the fan can rotate freely.
2. Tighten front wheel.
Tightening torque: 130 Nm (96 ftlb.)
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651, 996840, 996841
87 53 19 Removing and installing fan for condenser 1083