To Set Line Frequency; To Initialize Keysight E5260/E5270; To Set Beeper; To Apply Default Value - Keysight Technologies E5260 Series User Manual

To Set Line Frequency

1. Press the key.
Menu
2. Move the cursor to CONFIG, then press the
3. Move the cursor to LINEFREQ, then press the
4. Press the arrow keys to select the line frequency 50 Hz or 60 Hz.
5. Press the key to make the setup effective, or press the
Enter
changing the setup.
6. Press the key twice to close the setup menu.
Exit

To Initialize Keysight E5260/E5270

1. Press the key and the
Shift
2. Press the key for the message Reset:YES to initialize the Keysight
Enter
E5260/E5270, or press the

To Set Beeper

1. Press the key.
Menu
2. Move the cursor to BEEP, then press the
3. Press the arrow keys to select the beep ON or OFF.
4. Press the key to make the setup effective, or press the
Enter
changing the setup.
5. Press the key to close the setup menu.
Exit

To Apply Default Value

Specify a setup item by using the cursor, then press the
default value to the setup item.
Keysight E5260/E5270 User's Guide, Edition 6
Setting Up Keysight E5260/E5270
Enter
Enter
key.
Local
key to cancel initialization.
Exit
key.
Enter
Front Panel Operations
key.
key.
key to cancel
Exit
key to cancel
Exit
key to apply the
DefValue
5-5