Σ-V Large-Capacity Servopacks And Converters; Servopack Part Names - YASKAWA Sigma-V Series User Manual

1 Outline
1.1
Σ-V Large-Capacity SERVOPACKs and Converters
The Σ-V large-capacity SERVOPACKs and converters are designed for applications that require frequent
high-speed, high-precision positioning. The SERVOPACKs and converters make the most of machine
performance in the shortest time possible, therefore contributing to improving productivity.
1.2

SERVOPACK Part Names

This section describes the part names of SERVOPACKs.
Use a SERVOPACK together with a converter. For details, refer to 1.9 Combinations of Servomotors, SER-
VOPACKs, and Converters.
Note: For the purpose of this description, the SERVOPACK is shown with the front cover removed. Always keep the front
cover attached when using the SERVOPACK.
Analog
No.
Panel display
Panel operator
CN5 Analog monitor
connector
Panel operator keys
Nameplate
Input voltage
SERVOPACK model
Serial number
1-2
With plastic cover open
Name
Used to display SERVOPACK status, alarm num-
bers, and other values when parameters are input.
–
Used to monitor motor speed, torque reference,
and other values through a special cable (option).
Used to set parameters.
Indicates the SERVOPACK model and ratings.
Located on the side of the SERVOPACK.
–
Indicates the model number of the SERVOPACK.
–
Description Reference
2.1 Overview
–
6.1.3 Monitoring Operation
during Adjustment
2.1 Overview
–
–
1.7 SERVOPACK Model
Designation
–