Servopack Part Names - YASKAWA Sigma-V Series User Manual

1 Outline

1.3.2 SERVOPACK Part Names

No.
Rotary switch (S1001)
DIP switch (S1002)
MS1 LED indicator
MMA, MM2, MM3, and MM4
LED indicators
Panel operator keys
Ground terminal
1.3.2

SERVOPACK Part Names

This section describes the part names of SERVOPACKs.
Use a SERVOPACK together with a converter. For details, refer to 1.7 Combinations for Multi-Winding Drive
Systems.
Note: For the purpose of this description, the SERVOPACK is shown with the front cover removed. Always keep the front
cover attached when using the SERVOPACK.
M-II
No.
 DIP switch (S3)
1-4
Name
With plastic cover open
Name
Description
Used to set the MECHATROLINK-II station
address.
Used to make settings for MECHATROLINK-II
communications.
This indicator cannot be used.
Lights yellow during MECHATROLINK-II com-
munications.
Used to set parameters.
Used to protect against electrical shock.
Be sure to ground this terminal.
Description
Do not use this switch.
(cont'd)
Reference
4.1.1 Setting the
MECHATROLINK-II Com-
munications Switches
(S1001 and S1002)
4.1.1 Setting the
MECHATROLINK-II Com-
munications Switches
(S1001 and S1002)
–
–
2.1 Overview
3.1 Main Circuit Wiring
Reference
–