Table of Contents
Advertisement
Cleaning the Platen Glass
Regularly clean the platen glass and rear of the feeder to prevent originals from becoming dirty and printouts from
appearing to be smudged.
If the platen glass or rear of the feeder is dirty, originals can become dirty and printouts can become smudged after
scanning, copying, or sending faxes.
1
Turn OFF the power and remove the power cord from the outlet.
Machine(P. 108)
Turning OFF the machine deletes any data waiting to be printed.
2
Open the feeder.
3
Wipe the platen glass and rear of the feeder.
Wipe with a cloth soaked in water and wrung out. Next, wipe with a soft, dry cloth.
4
Allow the parts to fully dry.
5
Gently close the feeder.
6
Plug the power cord into the outlet, and turn ON the machine.
Machine(P. 107)
Maintenance
519
8WFY-0AJ
Turning OFF the
Turning ON the
Advertisement
Table of Contents
