2. INSTALLATION
2.2 Installation direction and clearances
CAUTION
(1) Installation of one servo amplifier
Control box
40mm
(1.6 in.)
or more
Servo amplifier
10mm
(0.4 in.)
or more
Do not hold the front cover to transport the controller. The controller may drop.
The equipment must be installed in the specified direction. Otherwise, a fault may
occur.
Leave specified clearances between the servo amplifier and control box inside
walls or other equipment.
10mm
(0.4 in.)
or more
40mm
(1.6 in.)
or more
Control box
Wiring clearance
70mm
(2.8 in.)
2 - 2
Up
Down