Table of Contents
Advertisement
Chapter 2 Preparations
1.10.6 Installing the N8117-01A expansion RS-232C connector kit
Install a PCI card to connect to the PCI slot by using the following procedure. For details, refer to the
instruction manual supplied with the connector kit.
The component parts for N8117-01A are as follows:
Item no.
RS-232C connector kit
<1>
manual
<2>
RS-232C cable (A)
<3>
RS-232C cable (B)
<4>
PCI bracket (1)
<5>
PCI bracket (2)
<4>
This product uses a combination of items <3> and <4>.
Follow the procedure below to install the kit.
1.
Refer to Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
Remove the side cover while referring to Chapter 2 (1.4 Removing the Side Cover).
3.
Assemble <3> RS-232C cable (B) and <4> PCI bracket (1).
4.
Open the PCI slot retention while referring to Chapter 2 (1.10.3 Installation).
Important
The N8117-01A expansion RS-232C connector kit contains two types of cables. This
server uses the RS-232C cable (B).
Tips
N8117-01A extra RS-232C connector kit is only supported by air-cooled models. It cannot
be installed in water-cooled models.
Item name
856-125671-002
804-063264-020
804-062746-820
243-112122-001
243-112122-002
<2>
Express5800/GT110d-S User's Guide
Specification
Amount
1
1
1
1
1
<3>
1. Installing Internal Optional Devices
Remarks
Preinstalled to cable
For full height PCI
<5>
87
Advertisement
Table of Contents
