Installing The Inner Rails On The Chassis - NEC SX-Aurora TSUBASA A300-4 User Manual

SX-Aurora TSUBASA A300-4 User's Guide


Installing the Inner Rails on the Chassis

Installing the Inner Rails
1. Identify the left and right inner rails.
2. Place the inner rail firmly against the side of the chassis, aligning the T-studs on the
side of the chassis with the slotted holes in the inner rail.
3. Slide the inner rail toward the rear of the chassis and under the T-studs.
4. An optional screw can be used to secure the rail to the chassis.
Slide rail mounted equipment is not to be used as a shelf or a work space.
Warning: do not pick up the server with the front handles. They are designed to pull
the system from a rack only.
Figure 2-3. Installing the Inner Rails
18
2
3