Table 2-123 Sv8100 9.5" (Base And Expansion) Maximum System Capacities - Trunks/Ports/Channels - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Table 2-123 SV8100 9.5" (Base and Expansion) Maximum System Capacities – Trunks/Ports/Channels
Number of:
Number of Timeslots
term
D (-48V)
SLT (-28V)
SLT (-48V)
term
D IP
Desktop Applications
(Desktop Client, Desktop Client with
Shared Services and SoftPhones)
SIP/WLAN
Analog Trunks (COT)
BRI
PRI (1.5M)
IP Trunk (SIP/K-CCIS – IP)
DTMF Receivers
VoIP Channels
Voice Mail Channels on CPU
V34 Modem

1 = For-law countries 104 timeslots per chassis are assigned the G.711 PCM communications (e.g., voice
communications) and 7 timeslots per chassis are assigned for the Data communications (e.g., HDLC over ISDN).
Thus the simultaneous data communications are limited up to seven per chassis.
 2 = An additional 64 DTMF Receivers are available when the PZ-BS10 is installed.
An additional 64 DTMF Receivers are available when the PZ-BS10 is installed.

If using Caller ID to analog trunks and DSP resources are set to common, DSP resources will only be used for analog
trunks and not analog stations.
Universal Slots
(CPU + 2
PCM

1
Data
9.5"
9.5" Base + Expansion
Base
x 1
x 1 x 2
(6 Slots) (12 Slots)
Slots)
48 104 208
7 7 14
32 80 176
32 80 176
8 20 44
16 40 88
16 40 88
48 96 192
32 32
16 channels
1 channel
x 3 X4
(18 Slots) (24 Slots)
312 416
21 28
272 368
272 368
68 92
512
128
512
136 184
136 184
192 192
200
32 32
128
Issue 13.0
System
Maximum
444
28
Total 512
Total 128
Total 512
Total 200
96 *2
128
16
1
2 - 1815