Multiport fuel injection and ignition system
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Continuation
- Separate 4-pin connector -2- (brown)
to HO2S 2 -G108- (after three way
catalytic converter).
- Connect multimeter with test leads
from VW 1594 to measure resistance
at terminals 1 and 2 on connector to
HO2S 2.
- Measure resistance value.
Specification: 0.00-24.2 ohms ( )
If the specification is not attained:
- Replace HO2S 2 -G108- (after three
way catalytic converter).
Page 69 of 144
24-53
6/12/2004