Volkswagen Passat 1995 Official Factory Repair Manual page 1095

Multiport fuel injection and ignition system
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
- Set multimeter to voltage measurement range.
- Check 4-pin connector terminals for short circuit
to battery positive (B+) according to wiring
diagram.
Terminal 2 and vehicle Ground (GND)
Terminal 4 and vehicle Ground (GND)
Specification: 0 volts
If no wiring malfunction is detected:
- Replace Mass Air Flow (MAF) sensor -G70-.
- Read readiness code
memory has been erased, repair must be
verified via appropriate display group
01-35 , Readiness code, creating.
Page 84 of 144
Page 01-33 . If DTC
Page
6/12/2004
24-68