Front Panel Elements - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

UltiMate 3000 Series:
NCS-3500RS and NCP-3200RS

2.4 Front Panel Elements

4
3
4
3
1
No. Element
1 Standby button
2 Lever
3 Display
Page 22
Fig. 1: Front panel view (here NCS-3500RS)
Function
Switches the module to Standby mode (the LED is lighted).
To cancel Standby mode and resume operation, press the Standby button
again (the LED is not lighted).
Notes:
To allow the module to change the mode, press and hold the Standby
button for at least one second.
If you switch a module to which a SRD-3x00 Solvent Rack is connected
to the Standby mode, the Solvent Rack, too, will be set to Standby mode.
Moves the valve actuators or, if already installed, the column switching
valves toward the front (→ page 78).
Shows information about the pump (upper display) and about the column
compartment (lower display):
- Status screen (→ page 85)
- Functions and menus (→ pages 94 and 96)
In addition, the following information appears on the pump display:
- General information upon power-up of the module (→ page 85)
- Messages (→ page 147)
Operating Instructions
2