UltiMate 3000 Series:
NCS-3500RS and NCP-3200RS
5.4.2.2.1 Main Menu
The Main menu provides top-level access to the menu structure. To open the Main menu for
the related pump, show the function keys and select Menu (→ page 94).
From the Main menu, you can open the following menus:
Control
•
On the Control menu, you can make the different settings for pump operation
(→ page 101).
Preferences
•
On the Preferences menu, you can make the basic settings for the related pump
(→ page 102).
Diagnostics
•
The Diagnostics menu provides information for diagnostic purposes (read-only). In
addition, you can perform a self-test for the pump module (→ page 102)
•
Configuration
The Configuration menu provides information about the configuration of the pump
module and allows you to make the required settings or perform the related commands
(→ page 103).
The pump type (NC pump or loading pump) determines which menus, commands, and
parameters are available on the individual menus.
Page 100
Operating Instructions