Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 98

UltiMate 3000 Series:
NCS-3500RS and NCP-3200RS
b) To see the parameters and commands that are available for the column compartment,
click the plus sign next to ColumnOven.
5. The commands and parameters available in the dialog box vary, depending on the
♦ Chromeleon version
♦ Options selected for the module in the Properties dialog (→ page 46).
♦ Display filter level (Normal, Advanced, or Expert)
Change the display filter level if necessary. Right-click in the commands list and
select the filter level on the menu.
Fig. 45: Changing the display filter level in the Commands dialog box
6. Verify that the module is connected in Chromeleon. If the module is not yet
connected, perform the Connect command.
Tip: The Connect command is listed under PumpModule. When you perform
the Connect command, the column compartment is automatically
connected, too.
For a list of the commands and parameters that are supported for the module, see the
Chromeleon Help. In addition to the commands and parameters for this module, the
Commands dialog box provides also access to all commands and parameters available for
any other modules that are installed in the selected timebase.
To open a control panel for the module
1. On the View menu, click Default Panel Tabset or click the corresponding icon on the
toolbar , and then connect to the Chromeleon server.
Chromeleon creates centralized control panels, called panel tabsets, for all timebases
available on the Chromeleon server. A panel tabset provides control panels for the
individual instruments in a timebase and, in addition, one or more panels for performing
Page 90 Operating Instructions