5.5 Information for Operating the Pump
This section provides specific information about settings and functions that should be
considered for operating the pump:
To learn more about ...
Choosing the solvents
Interdependency of column pressure and maximum flow rate (NC pump)
Establishing and saving the solvent viscosity (NC pump)
Setting the flow rate, flow acceleration, and flow deceleration
Setting the pressure limits
Recording the pump pressure
Rear seal washing
Purging the pumps
Detecting liquid leaks in the pump module
Adjusting the screen brightness or contrast
Operating the degasser of a SRD-3x00 Solvent Rack
Section 5.6 (→ page 127) provides information that should be considered for operating the
column compartment. For information about special Chromeleon functions, see section 5.7
(→ page 132).
Tip: To have an optimally running system, observe the recommendations in
section 5.8 (→ page 138).
Operating Instructions
UltiMate 3000 Series:
NCS-3500RS and NCP-3200RS
See page ...
108
110
114
119
120
121
121
124
124
125
125
Page 107