Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 56

UltiMate 3000 Series:
NCS-3500RS and NCP-3200RS
♦ Degasser Control
Click the arrow of the Degasser Control box and select External on the list if a
SRD-3x00 Solvent Rack is connected to the module. With this setting, the degasser
in the Solvent Rack can be operated and monitored via the pump module. The
related commands and properties are available, for example, in the Commands
dialog box (under PumpModule).
In all other cases, select None.
• Loading Pump Device, NC Pump Device (NCS-3500RS), or
Pump Device (NCP-3200RS)
(default names LoadingPump, NC_Pump (NCS-3500RS and NCP-3200RS))
Under this name, specific groups of properties and commands are listed in the
Commands dialog box for the related pump. There you can set, for example, the flow
rate and the partial flows, change the upper and lower pressure limits, and start a purge
cycle.
To control the pump with the existing control panels, accept the default name. If you
enter different names, you may have to re-link the controls on the control panels and edit
the names in the program files.
Limits Page
The loading pump and the NC pump of the NCS-3500RS have separate Limits pages,
displaying the allowed ranges for the flow rate and pressure of the related pump. You can
change the upper and lower limits within the allowed ranges. In addition, you can change the
pressure unit and, for the loading pump, change the flow unit.
Page 48
Fig. 16: Limits page (here for the loading pump)
Operating Instructions