9. To operate the flow meter, set the solvent types. See section 4.5.2 Flow Meter
Settings, page 69.
If the solvent that you use is not available in the solvent type list, perform a solvent
calibration for this solvent. See section 5.5.3.1 Performing a Solvent Calibration,
page 114.
Tip: To check that all flow connections are tight, perform a detailed leak test
(→ section 5.7.2, page 134).
Operating Instructions
UltiMate 3000 Series:
NCS-3500RS and NCP-3200RS
Page 233