Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 105

The selected menu item or parameter determines which keys appear on the navigation bar:
To ...
Return to the previous entry on a list.
If the list contains 5 or more items, you can use the arrow up key to scroll up through the
list, after reaching the first line (→ Key autorepeat, page 103).
Increment numerical values.
Proceed to the next entry on a list.
If the list contains 5 or more items, you can use the arrow down key to scroll up through
the list, after reaching the fourth line (→ Key autorepeat, page 103).
Decrement numerical values.
Select operating states (for example, the settings for the leak sensor).
Proceed to the next figure in a number. Any decimal point is skipped.
Confirm the selection and activate the input field if applicable.
If an item is read-only, the Select key will not be available.
Perform the selected command.
Return to the previous menu level.
Toggle between two operating states (for example, between On and Off).
Confirm the selection or input.
Cancel the action and restore the last value.
Note: Depending on the selected option, specific keys may replace these general keys.
If an error is found, one or more messages appear on the pump display. In this case, the
Prev, Next, and Clear keys appear on the navigation bar.
To ...
Return to the previous message.
Proceed to the next message.
Remove a message from the pump display.
Operating Instructions
UltiMate 3000 Series:
NCS-3500RS and NCP-3200RS
Select ...
∧
∧
∨
∨
∧ or ∨
>
Select
Execute
Back
Toggle
OK
Cancel
Select ...
Prev
Next
Clear
Page 97