Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 103

Function Key Description
Only NCP-3200RS
Set Flow
Opens the SetFlow dialog.
You can set the flow rate also on the Control menu (→ page 101).
Purge Only NCP-3200RS
Opens the Purge dialog. Select the component that you want to purge (left and/or right
pump head or flow meter). The component is purged for the Purge Time specified on
the Preferences menu (→ page 102).
You can access the Purge dialog also by selecting Purge on the Control menu
(→ page 101).
The following function keys are available for the column compartment:
Function Key Description
Menu
Opens the Main menu (→ page 105).
Opens the Temperature menu.
Temp
Under Temperature Control, you can turn temperature control on and off. Under
Temperature, you can set the target temperature
Valve Opens the Valves menu.
Under Left Valve Position and Right Valve Position, you can specify the fluid
connections for the related valve.
Leak Opens the Leak menu.
Under Gas Leak Mode and Humidity Leak Mode, you can determine whether leak
detection is performed (→ page 106). Under Leak Alarm Mode, you can determine
in addition whether a beep shall alert you (→ page 106).
Operating Instructions
UltiMate 3000 Series:
NCS-3500RS and NCP-3200RS
Page 95