Function Keys And Menus On The Display; Showing The Function Keys - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

UltiMate 3000 Series:
NCS-3500RS and NCP-3200RS

5.4 Function Keys and Menus on the Display

Function keys and menus are available on the front panel displays. Thus, you can make
several settings or execute certain commands directly from the module.
• For information about the function keys, see section 5.4.1 and page 97.
• For information about the menus, see section 5.4.2.2 (→ page 98).

5.4.1 Showing the Function Keys

Four white spots on the front panels mark the positions of the function keys. To show the
keys, touch the position of the utmost left spot on the display with the menu pen. The menu
pen is included in the shipment.
The function keys replace the information in the bottom line of the status screen. If no key
is selected, the bottom line of the status screen is restored after about 5 seconds. When the
module is connected in Chromeleon, the function keys (except Menu) are not available.
The following function keys are available for the pump:
Function Key Description
Menu
Opens the Main menu for the related pump (→ page 100).
Flow on Has the pump deliver with the specified flow rate.
(Flow off) While is pump is idle, the nominal flow rate is displayed and the flow value is flashing.
Select Flow on to have the pump deliver with the displayed rate.
While the pump is delivering with the displayed flow rate, the key name changes to
Flow off, the real flow is displayed, and the flow value stops flashing. Select Flow off
to have the pump stop delivering.
Page 94
Fig. 48: Showing the function keys
Operating Instructions