Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 136

UltiMate 3000 Series:
NCS-3500RS and NCP-3200RS
3. Select Temperature and Nominal, and then enter the temperature. Temperature
control becomes active and TempCtrl is automatically set to On.
Set TempCtrl to Off if you do not want to use temperature control for a certain application.
If you want to use temperature control later again, set TempCtrl to On. When you change the
temperature setting under Nominal, Chromeleon sets TempCtrl automatically to On.
To turn on temperature control on the display (column compartment)
1. Show the function keys and select Temp or select the Control menu.
2. Select Temperature and enter the temperature. Temperature control becomes active
and Temperature Control is automatically set to On.
Set Temperature Control to Off if you do not want to use temperature control.
Set Temperature Control to On again if you want to use temperature control later again.
When you change the temperature setting under Temperature, Temperature Control is
automatically set to On.
Page 128
Fig. 57: Turning on temperature control
Operating Instructions