Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 249

Description
Drain kit for UltiMate 3000 systems:
Cable clips (self-adhesive)
Y piece
T piece
Elbow
Connecting tube
Drain tubing
Installation instructions
Fitting plug (Viper, titanium, biocompatible)
Fuse, 2 A, slow blow (5 x 20 mm)
Plastic syringe (12 mL)
Retaining guide (e.g., for seal wash reservoir)
Silicone tubing (2.80 mm O.D. x 1.30 mm I.D.)
Solvent reservoir (250 mL) or
Seal wash reservoir (250 mL)
(including bottle cap)
Solvent supply line (1.0 x 1300 mm I.D. x L)
Solvent supply line filter, including:
1 Filter holder (top and bottom parts) and
1 filter frit (PEEK, porosity: 10 µm) + 2 spare frits
Tool kit for UltiMate 3000 RS, SD, BM pumps, and NCS-
3500RS/NCP-3200RS, including:
1 open-end wrench (size 1/4" x 5/16")
2 open-end wrenches (size 11 x 13 mm)
1 hexagon wrench (size 6 mm)
1 piston seal removal and insertion tool
1 pump head tool for RS/SD pumps and 1 pump head tool
for BM pumps and NCS-3500RS/NCP-3200RS (the tool is
required for establishing the distance during piston
installation)
Tubing connector (straight, for I.D. 1.0 - 2.0 mm)
USB cable, type A to type B, high speed USB 2.0
(cable length: 1 m)
USB cable, type A to type B, high speed USB 2.0
(cable length: 5 m)
Operating Instructions
UltiMate 3000 Series:
NCS-3500RS and NCP-3200RS
Part No.
6040.0005
6040.2303
Included in 6820.0026
Included in 6000.0010
Included in 6000.0042
6007.9100
Included in 2270.0026
6041.2530
Included in 6268.0115
Included in 6268.0117
6007.9304
Included in 6040.9502
6035.9035
6911.0002
Quantity
in the kit
4
5
5
12
1
6 m
1
2
2
2
6
3 m
3
2
2
1
5
1
1
Page 241