5.6.4 Recording the Temperature Signal
On the Oven / Valves page, the check box for the temperature channel is selected by
default when the NCS-3500RS is installed and configured in Chromeleon (→ page 50).
With this setting, Chromeleon generates the ColumnOven_Temp channel for recording
the temperature signal.
Thermo Fisher Scientific recommends recording the temperature signal in a program. If a
problem occurs, the temperature signal channel can provide helpful information to identify
and eliminate the problem.
5.6.5 Adjusting the Screen Brightness or Contrast
You can adjust the screen brightness or screen contrast to your requirements from
Chromeleon or on the column compartment display. To do so, select one of the following
alternatives:
•
In Chromeleon, open the Commands dialog box for the column compartment. Change
the screen brightness under Brightness and/or the screen contrast under Contrast.
•
On the column compartment display, select the Configuration menu (→ page 106) and
then select Display & Soft Keys. Change the screen brightness under Brightness and/or
the screen contrast under Contrast.
Operating Instructions
UltiMate 3000 Series:
NCS-3500RS and NCP-3200RS
Page 131