Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 254

Nano/cap system. nano/cap pump
Hide thumbs Also See for Dionex UltiMate 3000 Series:
Table of Contents

Advertisement

UltiMate 3000 Series:
NCS-3500RS and NCP-3200RS
Description
Solvent supply line set, including
Solvent supply line (1.0 x 1000 mm I.D. x L)
Used to connect the pump head of the NC pump to the solvent reservoir or to
connect the loading pump in the NCS-3500RS directly to the solvent reservoir.
Elbow tubing (1.0 x 100 mm I.D. x L)
For use with a shut off valve. For further information, see section 7.8, page 206.
Solvent supply line set, including
Solvent supply line (1.0 x 1300 mm I.D. x L)
Used to connect the pump head of the NC pump to the solvent reservoir.
Elbow tubing (1.0 x 100 mm I.D. x L)
For use with a shut off valve. For further information, see section 7.8, page 206.
Solvent supply line filter
Filter holder (6 holders)
Filter frit (PEEK, 10 µm), 10 frits
Solvent supply line from degasser to proportioning valve, loading pump
(Pack of 3 solvent supply lines, fitting connections, and line labels)
Stator for
2-position, 6-port switching valve
2-position, 10-port switching valve
Support ring for main piston seal (2 support rings) for
NC pump and loading pump
Syringe and tubing kit, including:
5 plastic syringes
3m silicone tubing (O.D. x I.D. 2.80 mm x 1.30 mm)
Tool kit for UltiMate 3000 RS, SD, BM pumps, and
NCS-3500RS/NCP-3200RS, including:
1 open-end wrench (1/4" x 5/16")
2 open-end wrenches (11 x 13 mm)
1 hexagon wrench (size 6 mm)
1 piston seal removal and insertion tool
1 pump head tool for RS/SD pumps and 1 pump head tool for BM pumps and NCS-
3500RS/NCP-3200RS (the tool is required for establishing the distance during piston
installation)
Tubing from proportioning valve to pump head, loading pump
(pack of 2 tubes with fittings)
Tubing kit, rear seal wash system → Rear seal wash system, tubing kit
Tubing, silicone tubing (2.80 mm O.D. x 1.30 mm I.D.)
USB cable, type A to type B, high speed USB 2.0 (cable length: 1 m)
USB cable, type A to type B, high speed USB 2.0 (cable length: 5 m)
Valve cartridge, check valve → Check valve, valve cartridge
Valve nut kit for check valve → Check valve, valve nut kit
Page 246
Part No.
6041.2540
6041.2530
6268.0115
6268.0117
6030.2547
6041.0007
6041.0005
6040.0012
6000.0010
6007.9304
6040.3023
6007.9100
6035.9035
6911.0002
Operating Instructions

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ncp-3200rsNcs-3500rs

Table of Contents